The granulator blade/knife is installed on granulator machine, the plastic scrap/such as plastic barrels, plastic films and other plastic scraps are put into the granulator machine, finally, these scraps are crushed into small size flakes and pieces according to your requirement, then transfer to next processing machine.

Parameter

If you have special requirement, we can customize according to your needs.

FAQ

1. What kind of granulator machine need this kind of blade knifes?

There are many single shaft granulator machine can use blade knifes, such as plastic films granulator machine, plastic blue drums granulator, plastic barrels granulator machine, hdpe/ldpe plstic scrap granulator machine,waste cables/wire granulator machine and other plastic scrap granulator machine.

2. How to install the blade knifes when replacing on the granulator machine?

Firstly, you need to stop the granulator machine, then open the granulator machine through the lifting device, then disassemble the old blade knifes, put the new blade knifes onto the rotor bases, then close the granulator machine, at last you can use the granulator machine as usual.

3. How to choose suitable blade knifes of the granulator machine?

Before choosing the blade knifes, you need to clarify what final flake size after shredding will you need? Then we will suggest you economical and suitable blade knifes according to your requirement.

4. What is material of the granulators blade knifes?

There are many kinds of materials on the granulator blade knifes, such as international famous brand of Japan brand SKD-1, American brand of D2, and famous brand of china Cr12MoV, and other material 9CrSi, you can choose suitable blade knifes for your great business.