The Hydraulic Auto Aluminum Residue Briquetting Press Machine is mainly compress the metal chips, aluminum chips, brass chips, bronze shavings, aluminum shavings into small bales with high density for metal manufacturer to remlelt again, easy to transport, stock and can highly improve the rate of melting, can make more profits, it has other names such as Y83 Series Of Briquetting Presses,Metal chips copper turning briqudetting press,Metal Shavings Briquetter,Copper Cloves baler,Waste Aluminum Copper Scrap Briquette Recycling Machine,Iron Chips Briquetting Machine,Waste Iron Chip Block Making Machine,Copper Powder Briquetting machine,High Efficiency Metal Chip Briquetting Press.

We not only have these baler machine, but have other machines such as India Aluminum Scrap Baler, JiangYin Manufacturer Scrap Metal Compactor Machine, Vertical metal Chips baling machine, Cheap Ring-Pull Cans Baling Machine, Bronze turnings baler, High density Copper Swarfs briquetting press, Factory Price Brass Millings briquetter, High Density Hydraulic briquetting press for brass millings, High Density Stainless Steel Millings briquette machine, 250Ton Iron Scrap Alligator Shear, 125Ton Waste Cans Baling Machine, 200Ton Metal Scrap Shear Machine, Chip Briquetting Machine Waste Iron Chip Briquette Machine, SBJ Metal Millings Blok Making Machine, Y81T Used Metal Compress Baler, High Density Aluminum powder block making machine, High Density Vertical briquetter for bronze drillings, Low cost Brass Chips baling machine, Hydraulic Shear Cutting Rebar, Factory price Bronze Powder briquette machine, Automatic Bronze Powder briquetting machine, Two Ram Pop Cans Press Baler, Push Out Scrap Metal Compactor, Automatic metal Chips baler, Y83 Copper Swarfs baling machine, High quality Bronze Chips briquetting machine, Aluminum Can Baler, Vertical Aluminum turnings block making machine, Scrap Automobile Container Shear, SBJ Brass Chips briquette machine, Vertical Brass Powder briquette machine, Scrap Sheet Cutting Scrap shear, High density metal Shavings briquetter, China Steel Millings briquetter, Big Light Metal Baling Press, Hopper Feed Aluminum Cans Baler, Best Shear Scrap Machine, Used Metal Container Shear, Low Price Steel Scrap Alligator Shear, Automatic UBC Recycling Baler etc...
Please contact with us if you have any questions.

Parameter

If you have any special requirements, we will customize according to your special needs.

Product Show

Advantage

> Long warranty time of the baler machine, you are no need to worry about the after-services.
> Strong structure of the machine, reliable, stable and durable, let you make more money.
> Adopts china famous pump to keep baler machine run smoothly.
> Enough spare parts with lower cost to keep the machine non-stop.
> Output capacity can be up to 200-300bales per hour, more efficient.
> World famous brand of Siemens PLC to promise you run the machine without any worry.
> 24 hours reply, video, phone call, email support, if any question, we response at first time.
> Stable hydraulic system to keep the machine run well.

Application

The baler machine can press below materials:

Copper Rice Granules	Bronze Chips	Brass Chips	Copper Shavings
Iron Cast Chips	Aluminu Shavings	Metal Chips	Stainless Steel Chips
Copper Cloves	Copper Chips

FAQ

> How much price of Metal Chips Briquetting Press Machine? 

Price of the machine is different, depends on how big of the machine is, but we can give you a word that our price of the machine is lower with high quality.

> What is payment term of Briquetting Press for Powder Aluminum Alus pan Chips? 

The payment of the briquetting press machine is 30% TT as deposit, and 70%TT balance paid 7 days before shipment, and LC is also acceptable, it is flexible depends on amount of the machine.

> How can we install the Briqueting Machine For Copper Chips? 

The machine is marked tips when shipping, and you can easily assemble the machine per the tips, after assembling, put it on the horizontal ground, adding hydraulic oil, connect to the power supply, then test and operate the machine per user manual, that is ok, if you have any questions, you can contact with us any time.

> How can i know you are a manufacturer or trader of Brass Metal Dust Powder Briquette Press Machine? 

You can visit our factory personally, also you can ask technical drawings such as 2D drawings 3D Drawings, we have professional technical team working on this, and will not give you these if a trader, because they don't have ability on this.

> Is your price of Scrap Copper Aluminum Chip Briquette Making Machine competitive? 

Yes, of course, our price is competitive, our price is cheaper than other suppliers such as eco baler,Wanshida baler, TF Baler, Gaode Baler, tcm baler, enerpat baler etc.. Because we are direct manufacturer of the baler machine, so we can promise the quality of the baler machine, and price is lower.

> Which country have you exported the Vertical Cast Iron Briquettes? 

We have exported the bbriquetting press machine to many countries such as  Japan, Thailand, Malaysia, Singapore, Indonesia, India, Pakistan, Sri Lanka, Iraq, Iran , Qatar, Kuwait, Oman, Turkey, Finland, Sweden, Norway, Iceland, Denmark, Russia, Poland, Czech, Germany, Austria, Britain, Ireland, Netherlands, Belgium, France, Greece, Romania, Bulgaria, Albania, Slovenia, Croatia, Italy, Spain, Portugal, Egypt, Chile, Argentina, Ecuador, Canada, America, USA, Australia, New Zealand, South Africa, Mexico and other countries.

> How to maintain Ruf Briquetting Steel Swarf Machine? 

When you were operating the machine, you need to clean the oil tank every 3 months, and check the wire, and oil pipe leakage or not, and also check the bolt every shift, you can find all maintenance items in the user manual.