A 50kg hydraulic press machine is a compact and versatile tool that can be used for various applications, including compressing metal scrap. However, it's important to note that 50kg (or about 500N) of force might be on the lower end for pressing metal scrap, depending on the type and volume of the scrap. 

Here are some key points and considerations:

Applications

- Metal Scrap Compression: Can be used to compress small amounts of metal scrap into more manageable sizes.

- Bending and Forming: Useful for bending and forming thin metal sheets or wires.

- Assembly Work: Can assist in assembling small parts where precise pressure is needed.

Features

- Force Capacity: 50kg (approximately 500N).

- Frame Material: Typically made from steel for durability.

- Hydraulic System: Uses a hydraulic pump to generate the pressing force.

- Table Size: The size of the pressing table will vary, but it should be large enough to accommodate the metal scrap you plan to process.

- Safety Features: May include safety guards, emergency stop buttons, and pressure relief valves.

Considerations

- Material Thickness: A 50kg press may not be sufficient for thick or large volumes of metal scrap. It is more suitable for thin sheets, wires, and small components.

- Volume of Scrap: For larger volumes or thicker materials, a higher capacity press (e.g., 100kg, 200kg, or more) might be necessary.

- Power Source: Some models are manual, while others are electric. Manual presses require physical effort, whereas electric ones are more convenient but may need a power source.

- Maintenance: Regular maintenance is required to ensure the hydraulic system operates smoothly and safely.

Safety Tips

- Read the Manual: Always read and follow the manufacturer's instructions and safety guidelines.

- Wear Protective Gear: Use gloves, safety glasses, and other appropriate personal protective equipment.

- Inspect the Machine: Regularly inspect the press for any signs of wear or damage.

- Secure the Workpiece: Ensure the metal scrap is properly secured to prevent it from slipping during the pressing process.

- Avoid Overloading: Do not exceed the rated capacity of the press, as this can lead to equipment failure and potential injury.

Alternatives

If a 50kg press is insufficient for your needs, consider:

- Higher Capacity Presses: Look for presses with higher force capacities, such as 100kg, 200kg, or even 500kg.

- Specialized Equipment: Depending on your specific requirements, there may be specialized machinery designed for processing metal scrap, such as balers or compactors.

Conclusion

A 50kg hydraulic press machine can be a useful tool for light-duty metal scrap compression and other small-scale applications. However, for more demanding tasks, you may need to consider a higher-capacity press. Always prioritize safety and follow the manufacturer's guidelines to ensure efficient and safe operation.

Parameter

If you have any special requirements, we will customize according to your special needs.

Product Show

Advantage

> The bale weight ranges from 40kg to 500kg, more options for your choices.    

> Enough spare parts with lower cost to keep the machine non-stop.    

> Long warranty time of the baler machine, you are no need to worry about the after-services.    

> Lifelong after services let you have no any concern, get more porfits.    

> World famous brand of Siemens PLC to promise you run the machine without any worry.    

> Adopts china famous pump to keep baler machine run smoothly.    

> Can press varous of metal scraps, non metal scraps, stainless steel scrap, metal chips etc...    

> 24 hours reply, video, phone call, email support, if any question, we response at first time.    

Application

The baler machine can press below materials:

Aluminum cans tins	Light Metal Scrap	Copper Tube/Pipes	Coppe Wire Scrap
Aluminum Extrusion Profiles	Stainless Steel Scrap	Lead Strips	Aluminum Shavings

FAQ

> How can we install the Automatic Metal Balers china? 

The baler machine is marked tips when shipping, and you can easily assemble the machine per the tips, after assembling, put it on the horizontal ground, adding hydraulic oil, connect to the power supply, then test and operate the machine per user manual, that is ok, if you have any questions, you can contact with us any time.    

> What profits can we get from the Recycling Metal Equipment In Korea? 

You need to know price of metal scrap, and price of the bales you sell to metal recycling center or steel manufacturer, then you can know how much profits you will get by this machine.    

> How long is the non-load cycle time of Recycling Scrap Metal Baler press? 

The single non-load cycle time is approx. 60 seconds, and we can make it faster or lower according to your requirement, such as 30 seconds one bale, or 90 seconds for one bale.    

> Before shipment, can you take testing video of Aluminium Scrap Baling Machine? 

Yes, of course, we not only can take a video of machine running before shipment, we also can take videos, photos of the process of manufacturing the baler for you.    

> Is there any spare parts along with the Industrial Metal scrap Compactors? 

Yes, we will provideo some spare parts for free which inlucdes tools, O Rings and some other electrical components like middle relay, and you need to pay extra cost for wear parts.    

> Are the interchangeable wear plate installed on Scrap Iron Baling press machine? 

Yes, the wear steel plate is changeable, you can easily change it when which wear plate is going to change, and we also can weld the wear plate directly, because this way, it is durable ans stable.    

> How much price of Aluminum Can Hydraulic Press? 

Price of the baler machine is different, depends on how big of the machine is, but we can give you a word that our price of the machine is lower with high quality.    

> What is lead time of Scrab Tin Presing Meshines? 

The lead time is various according to different models, generally speaking, it is approx. 30 days, and will be longer with bigger models, and shorter with small models, we will work overtime if you need the baler machine urgently.     

> What is HS Code of Tcm Baler Heavy Scrap Metal Baler? 

Generally speaking, we use HS Code 8422400090 for the baler machine, and we can use other HS Code per your convinience.